background image

9

10

Handling instructions and precautions

Mounting

  1.  

When installing each device, make sure that it is not stained 

with water or oil and is free from high temperature and 
humidity. In particular, avoid a location where condensation 
occurs.

Notes on use

  1.  

Be sure to turn OFF the power before inspection, cleaning, 

and maintenance.

  2.  

In the event of a failure, adjustment and repair are 

necessary. Be sure to contact us.

  3.  

Maintenance is very important for performance retention. 

Conduct periodic maintenance according to the Instruction 
Manual for the product.

  4.  

Check any devices and parts (in particular, low ozone 

resistant parts such as NBRs) used near the ionizer to see if 
they are ozone-deteriorated.

  5.  

Do not use this product with any moving parts that give 

vibration or impact.

  6.  

Do not use the AC adapter cable or the power and signal 

lines attached to this product with any moving parts. Doing 
so could cause the cable and lines to break.

  7.  

Use this product within the pulse frequency range 

mentioned in the specification table.

 

1.  

Make sure that no excessive external force is applied to the 

product.

 

2. 

Do not disassemble or alter the product.

 

3. 

Protect the product from ultraviolet rays, rain, and wind.

General precautions

  1.  

Be sure to ground the ground wire to frame ground (F.G.).

  2.

  If using any device that can generate noise (such as a 

switching regular and an inverter motor) around the product, 
be sure to ground the frame ground (F.G.) terminal of the 
device.

  3.

 After the end of wiring, check if the connections are correct.

Wiring

Warranty and disclaimer

1.

 Warranty Period

 

  The warranty period of KOGANEI CORP. products is 

one year from the date of delivery.

 

*  Some products have a two-year warranty period. For 

details, contact the nearest KOGANEI CORP. office or 
Overseas Department.

2.

 Warranty scope and disclaimer

(1)  If a failure attributable to KOGANEI CORP. is found in a 

product purchased from KOGANEI CORP. and an 
authorized retailer/dealer during the warranty period, 
KOGANEI CORP. will repair or replace it free of charge. 
For some products, a service life, such as the number 
of operations, may be specified in their warranty 
periods. For details, contact the nearest KOGANEI 
CORP. office or Overseas Department.

(2)  The warranty of each KOGANEI CORP. product shall 

apply to that product alone. Consequently, KOGANEI 
CORP. shall in no way be responsible for any incidental 
damage (including costs incurred for the repair and 
replacement of the product) attributable to any failure of 
the KOGANEI CORP. product, decrease in function, or 
decrease in performance.

(3)  KOGANEI CORP. shall in no way be responsible for any 

damage induced by any failure of the KOGANEI CORP. 
product, decrease in function, or decrease in 
performance or any damage to other devices 
attributable to the same.

(4)  KOGANEI CORP. shall in no way be responsible for any 

damage due to use or storage beyond the range in the 
product specifications mentioned in the KOGANEI 
CORP. catalog and the Instruction Manual or due to any 
acts not mentioned in the mounting, installation, 
adjustment, maintenance, and other notes.

(5)  KOGANEI CORP. shall in no way be responsible for any 

damage caused by any failure of the KOGANEI CORP. 
product due to any fire not attributable to KOGANEI 
CORP., any natural disaster, any act by a third party, 
the intention or negligence of the customer, etc.

Summary of Contents for DTY-ELG41













Reviews: