Prompt tone
Solution
Error 1: Oh dear! I cannot find
the dust collector
Cleaning is triggered when the dust box is taken out
Error 2: Please check if the radar
on top has been covered or
blocked
The radar top is covered or placed in an open area (there should
be no obstacle within an area of 6x6m2)
Error 3: Please place me in a new
location and try again
Pick the machine up or hang it in the air
Error 4: Please scrub the cliff
sensor and restart me from a new
location
The cliff sensor is covered or placed at height
Error 5: Please scrub the front
sensor and restart me from a new
location
The infrared avoidance sensor is dirty or covered
Error 6: Please scrub the right-
hand sensor and restart me from
a new location
The wall sensor is dirty or covered
Error 7: Please scrub the radar
housing on top and restart me
from a new location
The radar avoidance sensor is dirty or covered
Error 8: Please check if the
bumper has been blocked in some
way
The edge or collision sensor is stuck
Error 9: Master, please clean the
dust container and filter
The dust box is full or the filter screen needs to be replaced
Error 10: Dust container has
been removed, please clean the
container and filter
After error 9 is issued, user takes out the duct chamber and
error 10 is triggered
Error 11: I'm stuck, please help
me!
The machine is stuck
In the Box
Water tank x1
Duster cloth x1
Dusting brush x1
Left side brush x2
Right side brush x2
HEPA filter screen x1
Charging base x1
Adapter x1
User manual is subject to change without notice. For the latest version of your user manual, please
visit https://www.kogan.com/usermanuals/
23
Summary of Contents for SmarterHome LX10
Page 24: ......
