Kogan SMARTERHOME KAWFPAC09YA, User Manual

Page: 23 / 40

Sleep Mode
• In cold mode, press "SLEEP" on the remote control; or press Timer and the down
button on the control panel simultaneously;
• The speed in this case cannot be adjusted manually. In this mode, the fan will be
forced to work at low voltage.
•
The low speed indicator light will come on.
•
If you want to cancel, press the SLEEP button on the remote control or the Timer
buttons and the down button on the control panel again.
Remote Control
Method of Transmission
•
Point the remote controller at the air conditioner and press the button on the
controller. The instruction signal will be transmitted to the air conditioner.
• Upon receiving the signal from the remote controller, the air conditioner unit will
utter a "dee-" sound for acknowledgment.
Points of attention in using the remote controller:
•
Do not place the remote control near high temperatures, such as heaters, radiators
or electric blankets or pillows.
• Do not place the remote control in direct sunlight or strong light.
• Avoid accidental dropping of the remote control, as this could cause damage to
the remote control.
•
Do not place any blocking objects between the air conditioner and the control unit.
•
Do not splash the remote control with water or other liquids.
•
Do not place heavy objects on the controller.
• If the remote control does not work, replace the batteries and try again.
Replacement of Batteries
When the signal is transmitted but the air conditioner does not give a confirmation signal, it
means that the batteries are dead and need to be replaced.
• Remove the battery cover by sliding the cover in the direction of the arrow and
remove the used batteries.
•
Replace the batteries with new ones, paying attention to the "+" and "-" polarity.
•
Close the rear cover.