Before First Use
•
When unpacking check to make sure that the LED Umbrella Light is intact and
undamaged.
•
Spring loaded pole clamps for umbrella poles or hanging brackets for use in a tent
or gazebo. See 3 and 5 in Overview page.
Modes
•
3 modes of operation:
o
4 LEDs ON
o
24 LEDs ON
o
28 LEDs ON
Instructions
1.
Open the four battery compartments on the bottom of the Umbrella Light.
2.
Insert x4 new AA batteries (not included) in each battery compartment.
3.
Open the LED Umbrella Light by opening the lever on the side of the light and
placing the light around an umbrella pole (sold separately) with the LED lights
facing down.
4.
Close the Umbrella Light using the side lever. The Umbrella Light’s spring-loaded
pole clamps will secure your light on the umbrella pole. You may also use the
hanging brackets to secure it inside of a tent or gazebo.
5.
When ready to use the LED Umbrella Light, press the ON/OFF button on the side
of the light. There are 3 light modes.
6.
When you are finished using the Umbrella Light, or if leaving the Umbrella Light
unattended for an extended period of time, turn off the Umbrella Light by pressing
the OFF button.
INSTRUCTION
Note:
Ensure the batteries are installed correctly, with correct polarity (+/-) placement.
Check the markings on the batteries and the unit before installing.
Summary of Contents for NBOTLTUBBPA
Page 1: ...BATTERY POWERED OUTDOOR UMBRELLA POLE LED LIGHT NBOTLTUBBPA...
Page 2: ......
Page 7: ...NOTES...
