Kogan M650 ULTRA, User Manual

Page: 5 / 8

DPI Button
By pressing the DPI button, the sensitivity of the mouse can be adjusted between the three
pre-set DPI levels: 800/1200/1600.
1. Check the battery. If it is drained, replace it.
2. Disconnect and reconnect the USB dongle to establish a new connection.
3. Move to mouse closer to the receiver if it is out of optimum range.
Reconnecting the USB dongle
1. Insert the battery and turn on the power
2. Press the left, middle, and right buttons at the same time.
3. Let go of the buttons, then insert the dongle to the computer’s USB port.
4. Place the mouse near the computer when the dongle is inserted.
Note:
It may take a few minutes for the mouse to be used as required drivers may
automatically install to facilitate usage.
TROUBLESHOOTING