7
Turn the
SELECT
knob to cycle through the alphanumeric character list, press it to select an
appointed character.
@
Note
: WEP/WPA pass codes are case-sensitive.
If a wrong character is being input while you entering your password, select
‘
’
to delete this character.
@
Note
: a.> The full name of
is Backspace.
b.> The method of select
,
or
: while cursor point to ‘ ’, then anti-
clockwise turn the
SELECT
knob , you will get it.
c.> Select
will return to previous track.
d.> After select the final character of your password,
turn the
SELECT
knob to
, and then
press it to confirm.
e.> Radio
will automatically save the WEP/WPA you input, so no bother to re-enter these codes.
4. Press the
SELECT
knob to exit, the setting is OK now!
Access to wireless network
1. Continue above steps, or press and hold
MENU
to have your radio going back main menu page, while
cursor point to <
Station list
>, press the
SELECT
knob to confirm.
2. If it fail to connect to network,
please follow:
Check your router, see it working normally or not;
Relocating your radio to a stronger signal position is necessary!
Make sure your password input correctly.
