Settings
System
Parental
Display
Audio
Network
Audio
Speaker
Language
PCM Downsampling
Digital Output
Dynamic Range Control
48 Khz
PCM 7.1
Off
SYSTEM SETUP
17
2.1 PCM Downsampling
PCM Downsampling: To set the player
’
s digital output
PCM sampling rate. Such as 48KHz, 96KHz,Off.
Note:
Incorrectly setting the digital audio output
’
s
PCM sampling rate may result in unpredictable audio
playback.
2.2 Digital Output
Digital Output: set the digital audio outputs, such as
PCM: Mixed digital audio sent over HDMI in PCM
(if supported by HDMI device) and SPDIF in two-
channel PCM format.
Bitstream HD: Original bitstream from disc is passed
over HDMI and SPDIF using highest quality possible.
HDMI has higher quality capabilities with advanced
audio codecs like TrueHD and DTS-HD. BD audio
limited to soundtrack for main movie (i.e. no PiP audio,
no effects audio).
Bitstream Legacy: Original bitstream from disc is
passed over HDMI and SPDIF using legacy audio
formats. BD audio limited to soundtrack for main
movie (i.e. no PiP audio, no effects audio).
Bitstream mixed: BD audio streams are mixed and
encoded into a single bitstream. Primarily intended
for customers with SPDIF 5.1CH receivers who want
to enjoy mixed BD audio in surround sound.
PCM, Bitstream HD, Bitstream Legacy, Bitstream
mixed.
2.3 Dynamic Range Control
Dynamic Range Control: this is only active when
a Dolby Digital signal is detected.
Off: you can enjoy the movie with the standard
Dynamic Range.
On: When Movie soundtracks are played at low
volume or from smaller speakers, the system can
apply appropriate compression to make low-level
content more intelligible and prevent dramatic
passages from getting too loud.
Auto: the system turns on the Dynamic range
control for all BD movie soundtracks except Dolby
TruHD. If you have selected a Dolby TruHD track on
the BD disc, Auto tells the BD player to only turn on
dynamic range control if information embedded in
the Dolby TruHD sound track tells it to do so.
2. Audio Menu
1.7 Deep Color
Select Deep Color: Auto, 30 bits, and 36bits.
Note: HDMI 1.3 supports 10-bit, 12-bit and 16-bit
(RGB or YCbCr) color depths while 8-bit depths in
previous versions. This expands the colors displayed
from millions to billions, which is much more vivid
than the previous.
Settings
System
Parental
Display
Speaker
Network
Audio
Speaker
Language
Front L
large
Front R
large
Center
large
Surrond L
large
Surrond R
large
Rear L
large
Rear R
large
Subwoofer
120Hz
3.3 Surround L-R
Surround L-R:
Sets the player
’
s output frequency
response and downmixing characteristics by setting
the surround speakers to Small (surround speakers
have no subwoofers) or Large (surround speakers
have subwoofers).
3. Speaker Menu
3.1 Front L-R
Front L-R:
Sets the player
’
s output frequency
response and downmixing characteristics by setting
the front speakers to Small (Front speakers have no
subwoofers) or Large (front speakers have subwoofers).
3.2 Center
Center:
Sets the player
’s
output frequency response
and downmixing characteristics by setting the center
speaker to Small (Center speaker has no subwoofers)
or Large (center speaker has subwoofers), or Off
(no center speaker).
Summary of Contents for KGNBD2VBA
Page 1: ......
Page 29: ...P N 1 3090 B079 0000 R...