Kogan KAWLMFM55MA, User Manual

Page: 6 / 16

Step 3
Using a pencil, spirit level, mark the desired position for the mount on your wall, using the
wall mount to serve as a stencil for the hole positions. If mounting on dry wall or plaster-
board, use a stud finder first to check positions of wall studs and ensure the position is free
from electrical wiring. Using a drill, create the pilot holes.
Drywall / plaster:
Use a
ø
4.5mm or 3/16” drill bit, drilling 55mm deep.
Masonry / concrete:
Use a
ø
10mm or 3/8” drill bit, drilling 60mm deep.
Pencil, spirit level, stud finder and drill not supplied.