Kogan KAWLM70TLTA, User Manual

Page: 6 / 16

Step 2:
Drywall, plaster or timber walls (with studs)
Use a stud finder to locate safe and suitable locations to install into wall. Use a spirit level to
double check the correct angle of the mount and mark the intended hole positions with a
pencil (
2a
). When installing on a drywall, plaster or timber wall, refer only to the centre holes
of the mount. Drill holes in the desired locations (90mm deep, 6mm wide) (
2b
).
Insert the top screw (W-A) first, to support the mount (
2c
). With the wall mount held in place,
insert the washers and screws (W-C, W-A), tightening with a socket wrench (
2d
). When
installing on a drywall, plaster or timber wall, do not use the screw anchors (W-B).
A minimum of two people are recommended for this installation. Failure
to use safety gear and safe working methods may result in property
damage, serious injury, or death.