Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (the indicator
light will be continuously flashing).
If not, you can manually set the device in pairing mode while the sweeping robot is in
standby mode by long-presssing “hold” and “auto” buttons simultaneously for 5 seconds.
The buzzer will sound as it enters the network configura
ti
on mode, and the indicator light will
begin flashing.
Add device through network
5.
Ensure that the device is in pairing mode, with the indicator light rapidly flashing,
and tap “Confirm light is rapidly flashing”.
6.
Select Wi-Fi network (note: network must be 2.4GHz band) and enter the
password. The device will commence the pairing process and connect to the app.
7.
After successfully adding the device, it will be shown on the home page. Tap to
enter its control page.
