Charging Your Vacuum
1.
Connect the power adapter to the power adapter jack on the charging dock.
2.
Locate an electrical outlet on the wall close to the ground and plug in the power
adapter.
3.
Place the charging dock in a flat position on the ground with the back pushed up
against a wall. There should be no other objects or obstructions for two metres in
front of and one metre to the left, right and above the charging dock. Place the
dock out of direct sunlight.
When the robot has finished the planned clean, it will return to the charging dock
automatically. It will also return to the charging dock automatically when it has low battery.
INSTALLATION
Note
The cord should not be on the ground or obstructing the charging dock as it will result
in the robot being unable to find the charging dock.
The charging dock should always be plugged in to ensure charging when needed.
