- 7 -
5. press the open button. The base opens and the dust runs into
the dustbin.
6. carefully knock the remaining dust loose.
7. close the base.
8. place the dust container onto the cylinder vacuum cleaner.
9. check whether the dust container is securely seated.
Cleaning the motor filter
1. Turn off and unplug cleaner.
2. remove the dust container.
3. Open the dust container cover and take he filter out.
4. Hold the protective motor filter over a
dustbin. For a rough clean,gently knock over a dustbin.
5. Insert the dry protective motor filter back into its holder.
6. Place protective motor filter together back into its
receptacle.
7. Replace the filter cover by hooking it precisely from above first.
the engage the lock by pressing it until audibly clicks into place.
8. Place the dust container onto the cylinder vacuum cleaner.
9. Check whether the dust container is securely seated.
IMPORTANT! Never use the vacuum cleaner without a motor filter.
Cleaning the exhaust air filter
The exhaust air filter cleans the air a final time before it leaves
the vacuum cleaner. You can clean the exhaust air filter as follows:
1. Switch off the vacuum cleaner and disconnect the plug from
the mains. To do this always pull on the plug and not on the cable.
2. Remove the dust container .
3. Open the exhaust sponge cover.
4. Rinse the sponge filter under cold running water and allow dry.
5. Put the exhaust air filter back into place.
6. Close the exhaust sponge cover.
3
LOCK
exhaust sponge filter
Summary of Contents for KAVAC16TRBA
Page 1: ...s dZ USER MANUAL...
