Masonry / concrete:
Using a pencil and spirit level, mark the desired position for the anti-toppling bracket (P-C) on
your wall. Using a drill, create the pilot hole.
Use a
ø
7mm or 9/32” drill bit, drilling 40mm deep.
Insert wall anchor (P-F) into the drilled hole. Position the bracket in line with the pilot
hole and secure to the wall using screw (P-E).
Thread the cable (P-A) through the cable clips (P-B) and the bracket (P-C). Secure
the fasteners (P-D) using a Phillips head screwdriver.
