Aux in Mode
You can use another audio device with your KASPKXXBLTA speaker. This requires using an
audio cable with a 3.5mm plug on one end to connect with the Aux input on the
KASPKXXBLTA system.
1.
Press / MODE to shift from BT. mode to Aux in mode.
2.
Plug the cable from the audio device into the Aux connector on the back of the
KASPKXXBLTA speaker.
3.
To gain optimal volume levels, adjusting the output volume level on both the source
device and the KASPKXXBLTA speaker itself is recommended.
Summary of Contents for KASPKXXBLTA
Page 1: ...KASPKXXBLTA USER MANUAL...
