Kogan KASBR21DETB Quick Start Manual Download Page 10 | Manualshive

Page: 10 / 14

Kogan KASBR21DETB Quick Start Manual Download Page 10

10

NFC (Near Field Communication) Operation

Pair your NFC enabled mobile device directly with this unit with just a single tap.

1.

Activate NFC on your mobile device.

2.

Switch the soundbar to Bluetooth mode.

3.

Tap the mobile device on the NFC icon of the unit.

4.

Confirm the Bluetooth connection.

5.

To disconnect, tap the mobile device on the NFC icon of the unit to disconnect or

disable NFC from your mobile device.

NOTE: This NFC function only works with mobile devices that support NFC technology.
Tips

•

Some NFC enabled mobile devices cannot pair directly with the unit via NFC. In

such a case, please try either one of the solutions below:

•

Please download the App “Tap-and- Pair” from Google Play Store and install.

•

Pair with the unit manually first, then touch again on the NFC sensing area.

Remote Control

1

Power

Switch the unit between on and standby mode.

2

MUTE

Mute or resume the sound.

3

VOL-/VOL+

Decrease/Increase the volume level

4

In Bluetooth or USB mode, skip to the previous/next

1

«
...
8
9
10
11
12
...
»

Summary of Contents for KASBR21DETB















Reviews:

No comments