Power ON/OFF:
Press the Power button on the remote control or soundbar control panel to
turn the unit on and off.
AUX in:
Connect a compatible device using the 3.5mm stereo jack cable provided, then
press the MODE button on the remote control or soundbar control panel repeatedly until
AUX is displayed on the LED display. Ensure the connected device is producing an audio
signal, then adjust the volume of the soundbar using the Volume up and Volume down
buttons on the remote control or soundbar control panel.
Bluetooth:
Press the
BT
button on the remote control or repeatedly pressing the
MODE
button on the soundbar control panel until BT is shown on the LED display. The LED display
will flash to indicate that the soundbar is in Bluetooth pairing mode. Ensure that the device
you wish to connect is also in pairing mode and search for ‘Kogan 80W Dolby SB’ in its
device list. When the two devices are paired, the LED display on the soundbar will stop
flashing and remain constant. (The soundbar will now automatically re-pair with this device
whenever it is within range and has Bluetooth turned on.)
USB media mode:
The soundbar is compatible with USB flash drives of up to 64GB in size
and can play MP3/WAV/FLAC audio files directly. Simply insert a compatible drive into the
USB port on the back of the soundbar and the unit will automatically switch to USB mode
and play the first compatible track.
USB repeat mode
(accessed via the remote control) enables single track repeat (press
once) and all track repeat (press twice).
The media player also has a memory function that will recall and continue from the last-
played point when a USB flash drive that has previously been used with the soundbar is
reinserted.
HDMI(ARC):
Connect a HDMI ARC compatible device to the HDMI ARC port on the
soundbar using a standard HDMI cable (not supplied), then press the MODE button on the
remote control or soundbar control panel repeatedly until ARC is displayed on the LED
display. Ensure HDMI ARC is selected as the TV’s audio output, then adjust the volume of
the soundbar using the Volume up and Volume down buttons on the remote control or
soundbar control panel.
Optical in:
Connect a compatible device to the OPTICAL port on the soundbar using a
digital optical cable (not supplied), then press the MODE button on the remote control or
soundbar control panel repeatedly until OPT is displayed on the LED display. Ensure
Optical SPDIF is selected as the TV’s audio output, then adjust the volume of the soundbar
using the Volume up and Volume down buttons on the remote control or soundbar control
panel.
Equalizer modes:
The soundbar has 3 equalizer presents, tailored to complement various
styles of music. Press the EQ button on the remote to choose between Music (EQ1), Movie
(EQ2), News (EQ3).
Wall mounting:
The soundbar has two keyhole slots on the back to enable wall mounting,
using the fixings provided or a compatible soundbar bracket (not supplied).
OPERATION
