Kogan KAMSBSF532A, User Manual

Page: 17 / 24

17
Shelf adjustment
After clearing the shelf of items;
1.
Pull the shelf outwards from the fridge
2.
Tilt the shelf upward towards 90° until it is
perpendicular to the original position.
3.
Pull out the shelf by the direction.
Rack adjustment and removal
1.
Lift the rack upwards
2.
Hold the rack by both sides and then pull it
outwards.
3.
After cleaning, install the rack by reversing the
steps above.
You can also adjust the position according to the
height of stored food.
Water Tank & Dispenser Maintenance
Every three months, follow the steps below to maintain the water tank and dispenser.
Note:
If detergent is used to clean any part of the dispenser or water tank, flush the system
five or six times by filling the water tank and empty through the dispenser to remove any
residue that could remain before use.
1.
Completely empty the water tank.
2.
Remove the water tank by gently pulling forward
slightly then lifting away at a 45° angle (refer the
image below). Be careful when disconnecting from
the dispenser valve.
3.
Clean the water tank and wipe the dispenser valve.
4.
Allow the water tank and dispenser valve to dry.
5.
Replace the water tank by sliding downward into
place and then gently push back into place. Ensure
the water tank is aligned with the dispenser valve and
is flush against the refrigerator door.
6.
Flush the water dispenser five or six times by filling and empty the water tank
through the dispenser before use.