6
4.
2.
Wall Mount
(
Not
included
)
1.
Wall Mounting
Open the package, take out the product with foam still attached, and gently place
it on a desktop or table. Remove the extra parts and the foam covering the back
of the monitor. Press the release button to remove the stand plate. If the monitor
was already attached to the stand, remove the stand.
Remove the original screws x4 (
①
) from the opening in the back of the monitor.
Follow the directions received with your mount, stand, or accessory and install the
monitor on the wall or
fi
xture as desired. Remember to use the included 4 screws
when mounting the monitor. Refer to the image (
②
)
for correct screw placement.
Follow the directions received with your mount, stand, or accessory and install the
monitor on the wall or
fi
xture as desired.
Foam
Release button
Stand Plate
Screws*4
Use the 35mm
Do not discard the original screws. These may be needed for future use.
3.
