Kogan KAMN32RQ1LA, User Manual

Page: 6 / 20

Installing the Stand Base
1. Installation method:
Open the carton, remove the bracket and the base and lock them with one screw,
then take out the rotating shaft assembly and install the two screws on the
bracket.
Removal method:
Use a screwdriver to unscrew the screws of lock bracket, rotating shaft and base.
2. Remove the monitor from the carton, lay it flat with the back facing upwards and
clamp the base assembly to the rotating shaft of the monitor.
The base assembly can be taken out by directly pulling the quick release button
upwards by hand.
ASSEMBLY
Dismantle
Headphone Clip
Shaft Assembly
Screws*2
Assembly
Stand
Screw
Base
Quick Release Button