Kogan KAM237UPSFA, User Manual

Page: 14 / 20

14
CLEANING AND MAINTENANCE
(cont’d)
Servicing
• The unit should be serviced by an authorised engineer and only
genuine spare parts should be used. Under no circumstances
should you attempt to repair the unit yourself. Repairs carried out
by inexperienced persons may cause injury or serious malfunction.
Contact Kogan.com
Switching Of for Long Periods of Time
• When the unit is not in use for a long period of time, disconnect it from
the mains supply, empty all food and clean the appliance, leaving the
door ajar to prevent unpleasant smells.
Warm tips
• The refrigerator enclosure may emit heat during operation specially
in summer, this is caused by the radiation of the condenser, and it is a
normal phenomenon.
• Condensation phenomenon will be detected on the exterior surface
and door seals of the refrigerator when the ambient humidity is large.
This is a normal phenomenon, and the condensation can be wiped
away with a dry towel.
• Buzz will be generated by running compressor specially when starting
up or shutting down.
Tips for energy saving
• Try not to open the door too often, especially when the weather is wet
and hot. Once you open the door, close it as soon as possible.
• Every now and then check if the appliance is sufficiently ventilated
(adequate air circulation behind the appliance).
• In normal temperature conditions, please arrange the thermostat at
the middle setting.
• Before loading the appliance with packages of fresh food, make sure
they are cooled to ambient temperature.
• Ice and frost layer increase energy consumption, so clean the
appliance as soon as the layer is 3-5 mm thick.
• If it is the outer condenser, the rear wall should be always clean free of
dust or any impurities.
• The appliance should be located in the coolest area of the room, away