Kogan kaled55 series, User Manual

Page: 18 / 28

-18-
5). Signal Information: Displays the signal information in DTV (digital TV) mode only.
6). Software Update (OAD): This setting should be set to Off in Australia.
7). Software Update (USB):
The second item of the MENU is PICTURE MENU. You can adjust picture effects here, such as contrast,
brightness, etc.
Press to move, press OK to adjust.
2. PICTURE MENU
MENU SETTINGS
WARNING: Do not attempt to use this option unless you have a valid software program for the stored on a
compatible USB drive, and the drive is connected to the TV. Remove the antenna cable from the TV RF port, go
to the channel Menu, select
"
Software Update (USB)
"
and press OK to run the update.
TV
Color Temperature
Aspect Ratio
Noise Reduction
Screen
Picture Mode Standard
< >
PICTURE
MENU
Picture Mode Standard
Contrast 50
Brightness 50
Color 50
Sharpness 50
Tint 50
Color Temperature Medium
Red 50
Green 50
Blue 30
MENU
Screen
Auto Adjust
Horizontal Pos.50
Vertical Pos.50
Size 50
phase 38
OK
NOTE:
1). In the Picture Mode sub-menu, the Tint option is available in NTSC system countries only.
2). There are four colo
u
r temperature modes that can be selected: Medium, Warm, Cool and a User adjusment
option.
3). The Aspect Ratio option allows you to select either Auto, or manually select 4:3, 16:9, Zoom1, Zoom2 or Just
Scan screen ratios. For general use leave this setting in the Auto position.
4). The Screen option is only available once the Input Source is set to PC and a compatible signal is present on
the VGA input socket. Once selected, you can adjust the horizontal and vertical screen position, size and phase
or select an Auto Adjust mode.
5). For improved video processing, access to the Colour adjustment may not be available in the Picture Mode
(User) area when the TV is used with progressive scan video material from externally connected equipment. If
adjustment of the Colour control is required to correct defective source material, change the video mode of your
connected equipment to an interlaced format.
The TV’s default for Picture Mode is the "Standard" setting, which is recommended for home viewing.
6). The Noise Reduction option is for use in areas using ATV (analogue) transmissions. In Australia, this sub-
menu should be set to the Off position.