PVR Operation
Preparing to record programs
Before the PVR function can be used, a suitable USB storage device (USB flash-drive or USB
hard-drive) must be connected to the USB socket on the rear side panel of the TV. The USB
storage device should only be connected or disconnected when the TV is switched off. The USB
PVR function relies on the use of high quality USB drives, with higher speed models likely to
provide the best performance. From the Option Menu, enter into the PVR file system and choose
“check PVR File System”. Click “OK”, then wait until “Checking” changes to “Success”.
Note: please check the result marked “speed”. If it is “FULL HD support”, that means the speed
of your USB device is suitable for time shift and record functions. If not, please format the device
to make sure the USB device is capable of handling the recording functions. The default “Free
Record Limit” is 6 hours, if the space on the disk is big enough. If the space is not big enough,
the record time will be shorter, depending on the capacity of the device. During the “Check PVR
File System” checking, please do not take any other operation until finished.
The recordings have to be done from within the TV PVR system. The recordings can only be
played in the same TV, and generally not in any other devices (Computer, DVD etc..) that are not
compatible with the .TS file format.
In order to carry out any kind of recording, the TV will require you to format the connected USB
device to store the recording. The High Speed format option is recommended for better HDTV
recording results.
WARNING: WHEN YOU FORMAT THE EXTERNAL USB DEVICE YOU WILL LOSE ALL THE FILES
AND INFORMATION ALREADY STORED ON THE DEVICE.
From the OPTION MENU, enter into the PVR File System as shown below:
Select Disk
Select which USB drive type to save the recorded file onto, then press OK to return
to the PVR menu.
Check PVR File System
Checks if the PVR File System set up will work with your USB Device or not.
22
Summary of Contents for KALED48XXXYA
Page 1: ......
