Note:
Please note the T-shaped plastic protector. This is
fitted to protect the ladder’s feet during transit. Be
sure to remove this and throw it away before using the
ladder.
It is perfectly normal for this part to become broken or
mishappen while the product is on its way to you. This
means the protector has done its job, preventing the
ladder from being damaged.
Stabiliser bar
IMPORTANT:
The stabiliser bar should be attached before use.
•
Place the stabiliser bars into the ends of the side rails at each end of the ladder and
secure with the nuts, bolts and washers provided (see diagram below).
•
Do not use the ladder without the stabiliser bars attached unless otherwise stated.
•
Always check that the stabiliser bars are secure before putting any weight on the
ladder.
•
Only use the stabiliser bars supplied.
Bolts
Side Rails
OPERATION
