Transferring files from the camera to the computer
There are two methods to transfer files.
•
If your PC has a Micro SD card slot:
Press the Micro SD card to remove it from the
camera and insert it into the Micro SD card slot on your PC. Photos and videos can
then be transferred.
•
If your PC does not have a Micro SD card slot:
Ensure the camera is turned on.
Connect the USB cable into the USB port on the camera and your computer. The
computer should then detect the camera as a new connection. Once accepted,
photos and videos can then be transferred.
Using the camera without a Micro SD card
Without a Micro SD card, the camera can be connected to your computer and be used as
the primary camera for your computer.
Factory reset
To reset the camera, use a pin (not included) to press and hold the Reset button for at least
five seconds.
Note:
If connecting the camera to the PC, do not loosen the connection of the USB cable,
and do not remove the Micro SD card.
