PRODUCT LAYOUT
OPERATION
Prior to first operation, place the unit into location at room temperature for half
an hour before running. (This is especially important when the outdoor
temperature is below 5°C).
It is recommended that you use this product is temperatures between 5 ~ 40°C,
when the relative humidity is less than 80%RH.
Use clean, clear water that is not above 40°C.
Check the water basin each time to ensure that it is clear.
S
teps
•
Take the water tank (3) out of the base (14), then remove the valve cap (7).
Fill the water tank (3) with clean water, then close the valve cap (7) and
put the water tank (7) back onto the base (14).
•
Put the nozzle (1) into the socket on top of the water tank (3).
•
Connect the power cord (18) to the mains power supply. The machine will
now be in standby mode. NOTE: Never run the unit when there is no water
in the water tank.
•
Switch the unit on be pressing ON (15). The blue power LED will then
illuminate. The unit will operate with the lowest mist output, while also
using the fan motor. When unit is OFF, all functions except the ANION are
not valid and the blue power LED will not be lit.
Summary of Contents for KAHUM58IONA
Page 1: ......
