Kogan KAHCWATPURE Quick Start Manual Download Page 3

Operation

1. Insert the bottle vertically on the seat, then press the water faucets until water flows out

of the red hot water faucet.

2. Insert the power plug to the wall socket, then turn the electric switches to the ON 

position to start the appliance. DO NOT MOVE BOTH SWITCHES AT THE SAME TIME. 

The cooling and heating indicator lights should light up. This device is designed to 

provide hot or cold water whenever you require it. It will automatically turn off when the

water reaches the desired temperature, then it will turn on again when the water falls 

outside this temperature.

Attention

Make sure you have checked that water will pour from the hot water faucet before 

plugging the unit in and turning it ON. If the dispenser is turned on with an empty water 

tank, it may damage the unit.

When moving the water cooler, do not tilt the unit more than 45° to avoid damaging the

compressor.

Always install the dispenser indoors on a flat surface, at a distance of no less than 15cm 

from the wall behind it.

Keep appliance away from high temperatures, in a dry, well ventilated place. Never 

install unit in the open air, where it may be rained on or in direct sunlight.

Children should NEVER use the hot water faucet.

If the appliance is not going to be used for a long period of time, unplug the unit and 

drain all water from the interior.

Before first use and after a long period of non-use, the water tank and water pipes 

should be cleaned. The first tank of heated water must be discarded (switch the heating 

system to OFF while draining the tank).

Wash the system once every 3-6 months.

Do not just pull the plug to cut the power from unit. The unit must not be turned OFF or 

ON by simply connecting or disconnecting the power source.

Do not clean the outside of the unit with water to avoid electric shock. Clean it with a 

soft cloth.

If you are not using the unit for a long period of time, or even during the night, you can 

turn it OFF to save energy.

Do not attempt to change the power cord yourself in the event of damage. Contact the 

Kogan.com customer support team.

The equipment must be installed in a location where you have easy access to the 

electrical plug.

Keep the ventilation openings at the back of the unit uncovered and unobstructed.

Do not damage the refrigerant circuit.

The environmental temperature for this appliance should be between 18°C and 38°C.

This appliance can be used by children aged from 8 years and above, or persons with 

reduced physical, sensory or mental capabilities or lack of expereince and knowledge if 

they have been given supervision or instruction concerning the use of the appliance in a 

safe way and understand the hazards involved. 

Do not store explosive substances such as aerosol cans with a flammable propellant 

near this appliance.

This appliance is designed to be used in household and similar applications such as:

Staff kitchen areas in shops, offices and other work environments

Farm houses and by clients in hotels, motels and other residential environments

Bed and breakfast type environments

Catering and other similar non-retail applications

Summary of Contents for KAHCWATPURE






Reviews: