•
The fridge/freezer should be located on a completely flat surface, leave 50-100 mm
between each side of the appliance and the wall and leave 300 mm between the
top of the appliance and the ceiling.
•
Choose a location which is not exposed to
sunlight, high temperatures or humidity.
•
Pull out the bottom panel before installation.
•
The height and balance of the fridge/freezer can
be adjusted by rotating the two front legs.
Rotate clockwise to increase the height, rotate
anticlockwise to decrease.
•
The location should be firm and flat. An unsecure position may cause noise and
vibration:
a)
The noise may be increased if the floor is not firm.
b)
Put a sheet under the appliance for solving the heat emission if you need
to position on carpet.
•
Make sure the adjustable legs are level on the floor and set the fridge/freezer to
slope backwards slightly to keep the doors tightly closed.
INSTALLATION
≥300mm
≥50mm
≥50mm
