Kogan KAELSTMXSVA, User Manual

Page: 7 / 20

Using the mixing bowl
1. To lift the arm, press the release switch (2) downwards in the direction of the arrow.
The arm will now move upwards. (FIG2)
2. Place the pot cover into its body. (FIG3)
3. Place the mixing bowl into its holding device (Step 1) and turn the bowl clockwise
until it locks into place (Step 2). (FIG3)
4. Mount the required utensil (dough hook, beater, or whisk) by inserting the top into
the output shaft and pressing down until it locks into place. (FIG4 and FIG5)
5. Add ingredients to the bowl as required. Do not overfill the machine - the maximum
quantity of ingredients is 2kg.
6. Lower the arm using the release switch (2). (FIG6)
7. Insert the mains plug into a properly-installed 220-240V~50/60Hz safety power
socket.
8. When using the mixing bowl, ensure sure the rear cover (10) is in place, as the
machine will not operate otherwise.
9. Switch on the machine, setting the speed dial to between 1 and 6 as required.
10. For pulse operation (kneading at short intervals), turn the switch to the “PULSE”
position. The switch must be held in this position according to the desired interval
length. When the switch is released it returns automatically to the “0” position.
11. After kneading/stirring, turn the speed knob (3) back to the “0” position as soon as
the mixture has formed a ball, then remove the mains plug from the wall socket.
12. Press the release switch (2) downwards and the arm will be raised.
13. The mixture can then be released with the help of a spatula and removed from the
mixing bowl. The mixing bowl can then be removed.
NOTE:
After use, ensure all accessories are cleaned following the guidelines in the Cleaning & Care
page of this user guide. Do not use a dishwasher for any of the removable components.
OPERATION
WARNING:
After 10 minutes of continuous operation of the cookie or pasta
maker attachments, allow the machine to cool. Do not operate continuously
for more than 30 minutes, or the performance of the unit may be affected.
WARNING:
Do not operate the blender, vegetable cutter, meat mincer or
sausage attachments for more than 5 minutes. Allow the machine to cool for
15 minutes after a full continuous 5-minute cycle.