Fitting the electric blanket:
The electric blanket should be laid on a firm and un-adjustable mattress. The blanket should
be laid flat from shoulder to feet when sleeping.
The electric heating blanket must be spread with the attached controller positioned towards
the top of the bed. The side with the switch should preferably be placed near the shoulder for
convenient operation.
To prevent the blanket from moving or creasing during use, fit the blanket securely to the
mattress. Any creased spot tends to cause overheating which may be hazardous.
Controller:
•
To install the controller, insert the plug into the mating connector on the electric
blanket until the locking tab snaps firmly into place.
•
To remove the controller, lift the locking tab up with your finger and pull the plug
directly out. Do not pull the controller cable and Do not try and pull the controller
plug out without lifting the locking tab as you will damage the socket.
INSTALLATION
Note:
Single bed models will come with only one controller. All other sizes include two
controllers.
