Kogan KACRDWFLBKA User Manual Download Page 3

 
 

 

 

 

 

If you have had oral or dental surgery in the past 2 months, consult your doctor 

before using this flosser. 

 

When using this flosser for oral cleaning for the first time, you may experience 

minor gum bleeding even under the case of healthy gums. This is because your 

gums are stimulated by the jet pressure for the first time. It will stop bleeding after 

1-2 weeks. If your gum bleeding lasts for more than 2 weeks, stop using the flosser 

and consult your dentist. 

 

Do not use this flosser if the USB cable or plug is damaged. Ensure the USB cable 

is not damaged before and after usage. Keep the USB cable away from heated 

surfaces. 

 

Do not connect to a charger which does not have the rated voltage. See the 

Specifications section. 

 

The flosser's charging port has a silicon cover to protect it from water or liquids. 

Ensure there is no residual liquid in the port before charging. 

 

This flosser is not intended for use by persons (including children) with reduced 

physical, sensory or metal capabilities or lack of experience and knowledge, unless 

they have been given supervision or instruction concerning use of the flosser in a 

safe way by the person responsible for their safety, and understand the hazards 

involved. 

 

Do not use this flosser to inject water into ears, nose, bottom of your tongue or 

other sensitive body parts. The pressure generated by this flosser may cause 

serious damages. 

 

Do not disassemble or repair this flosser. 

 

This flosser’s jet tip can be replaced. Use correct replacement jet tips by 

Kogan.com. See the Cleaning and Care section. 

 

Do not put or insert any strange objects into the flosser. 

 

Do not touch the flosser’s power supply while charging. Do not charge it in a moist 

 

environment. Failure to follow these instructions could result in electric shock or 

damage to the flosser. 

 

Do not place or store the flosser where it may fall or be pulled into a bathtub, 

shower, or sink. 

 

The flosser can only be filled with water. Consult dentist before filling it with other 

non-corrosive liquid. 

 

       SAFETY & WARNINGS 

Note: 

There may already be liquid in the water tank of the flosser. This is the distilled 

water remaining during the factory inspection. There is no hazard for health and 

safety. 

Summary of Contents for KACRDWFLBKA













Reviews: