Cleaning & Care
Cleaning Dust Compartment
Remove dust compartment from body.
Press the release button and the dust will fall out (fig.A).
If the filter is dirty, remove (fig.B) and clean it with water.
Allow it to dry before reinstalling.
Cleaning Filter
Remove dust compartment from body.
Rotate cust compartment cover anticlockwise from to open
and remove dust compartment, remove filter assembly.
Pull the filter frame by the knobs and remove the sponge filter
and HV Cotton filter. Clean in warm water and allow them to
dry completely before reassembling.
Troubleshooting
IMPORTANT: If you are experiencing any issue with the appliance
whatsoever, first inspect the filters and all parts of the brush head carefully
and ensure there is no buildup of dust or dirt.
This is the most common cause of vacuum cleaner faults and problems, including
powering on and suction strength.
If you experience any issues, contact Kogan Support.
Issue
Possible Cause
Steps to Resolve
Not turning on
Battery not charged
Charge battery
Low suction
Low battery or clogging
Charge battery and clear filter
Dust escaping
Dust cup full or filter assembly
incorrectly assembled
Empty dust filter & cup and
reassemble correctly
User manual is subject to change without notice. For the latest version of your user manual, please visit
https://www.kogan.com/usermanuals/
5
