background image

Connecting the appliance 

 

 

 

Making ice cubes 

 

1.

 

Press On/Off on the control panel to begin the ice making cycle. 

2.

 

Select the size of the ice cube by pressing the Select button. 

3.

 

The ice making cycle lasts 6 to 15 minutes, depending on the size of the ice cube 

selected and the ambient temperature. During extreme temperatures, the 

operational time will differ significantly. 

4.

 

If the water pump cannot inject water, the ice maker will stop automatically, and 

the Add Water indicator will illuminate on the operation panel. Check the water 

bottle and replace with a new bottle full of water as required. 

5.

 

Press On/Off button again to start the unit again. 

 

 

DANGER

 

Improper use of the grounded plug can result in the risk of electrical shock. If the 

power cord is damaged, discontinue use and contact Kogan.com. 

 

1.

 

This unit should be properly grounded for user safety. The power cord of 

this appliance is equipped with a three-prong plug which mates with 

standard three-prong wall outlets to minimize the possibility of electric 

shock. 

2.

 

Plug your appliance into an exclusive, properly installed, grounded wall 

outlet. Do not, under any circumstances, cut or remove the third (ground) 

prong from the power cord. Any questions concerning power and/or 

grounding should be directed toward a certified electrician.  

3.

 

This appliance requires a standard 220~240 volt, 50Hz electrical outlet 

with a three-prong ground. 

 

 

Summary of Contents for KA21CBDISPA













Reviews: