Kogan FORTIS 700C, User Manual

Page: 20 / 28

20
Table for Battery Level Check:
Number of
Segments
Battery status
Number of
Segments
Battery status
10 ≥ 90% 4 35% ≤ C<45%
9 80% ≤ C<90% 3 25% ≤ C<35%
8 70% ≤ C<80% 2 15% ≤ C<25%
7 60% ≤ C<70% 1 5% ≤ C<15%
6 50% ≤ C<60% Border blinking C<5%
5 45% ≤ C<50%
4. Parameter Setting
Setting Preparation
When the display is active, pressing the Mode (i) button twice (the interval between the two
pressing actions should be shorter than 0.3 seconds), the system will enter the MENU
parameter setting state, in which the display parameters can be set. Press the Mode (i)
button twice again to exit the parameter setting state.
Enter the Parameter Setting Interface
In the parameter setting state, when the parameter to be set begins to flash, press the
Increase (+) or Decrease (–) buttons to adjust the parameter value. Press the Mode (i) button
to switch among the to-be-set parameters. Press the Mode (i) button twice (the interval
between the two pressing actions should be shorter than 0.3 seconds) to exit the parameter
setting state.
In the parameter setting state, if no operation is performed to the display for 10 seconds, the
display will return to the normal riding state.