
28
•
All parts should be checked at least once a month.
•
Check all nuts and bolts for tightness and tighten when required.
•
Check for signs of wear to bolt coverings. If sharp edges are found, replace as required.
•
In certain regions (seaside areas), certain coatings could be prone to damage. In this
case, it is advised to use a rust prevention treatment.
•
Check swing seats, chains, ropes and other means of attachment for evidence of
deterioration; replace when required in accordance with the manufacturer's instruction.
•
All parts that are under constant friction should be oiled regularly using a suitable
lubricant.
•
The ground on which the play centre is set up should be cleared regularly. All objects
such as stones or anything else that could cause injury in the case of a fall should be
removed.
•
It is recommended that during the winter period when the equipment is not in use, all
apparatus is removed to prevent deterioration due to bad weather.
•
Sand rested areas and tubular members and repaint using a non-lead-based paint
when required.
•
Modifications to the original activity toy should only be carried out under instructions
from the manufacturer.
•
Defective parts should only be replaced in accordance with the manufacturer's
instructions.
•
For aesthetic reasons, you may want to apply a timber treatment to the timber parts.
All outdoor wooden products require routine inspection and regular maintenance. After
installation, a follow-up inspection should take place after one week and twice a month
thereafter for the remaining life of your play products. Maintenance should be performed at
any time it is deemed necessary. Generally, major maintenance (wood refinishing) should be
performed at twelve-month intervals from the date of installation. Inspect and perform
maintenance based on the following checklist. Major wooden parts: Inspect for splintering
and structure defects at regular intervals. For very minor splinters or chipping, lightly
sanding and refinish with an exterior water repellent stain can assist. If timber has cracked
or split significantly, replacement parts may be required, please contact national customer
service centre for any replacement requirement. At regular intervals, the application of a
penetrating oil-based sealer stain to all wooden components is essential. Please consult
your local hardware or home improvement store for recommendation of an appropriate
product, Ensure the product does not contain hazardous chemicals once dry that can pose
a potential health risk to children. We hope you have a safe enjoyable time using the Multi
play set.
CLEANING & CARE
Summary of Contents for CLIMB AND SLIDE
