This laptop fits a 7.5mm (2.5”) SATA 3.0 HDD
with a maximum capacity of 1TB and is not
compatible with other sizes.
Ensure the laptop is turned off before installing
an external HDD (not supplied).
1.
Flip the laptop over and remove the two
screws holding the HDD cover in place.
Remove the cover.
2.
Place your HDD with the contacts facing on
the right. This is where the contacts of the
laptop are located. Slide the HDD to the
right to install.
3.
Use the existing threading to screw the HDD
into place. Once secured, place the cover
back into position and resecure the screws
removed from step 1.
INSTALLING AN HDD
Notes:
•
Your HDD may be inserted with either
side facing up, however, only one
orientation will function correctly with
the laptop. If you are unable to detect
your HDD with one orientation, try to
change the orientation of the HDD to
show the other side.
•
Be careful not to damage the contacts.
•
Images are used for reference only.
2
3
Screws
