Kogan 3-IN-1, User Manual

Page: 11 / 20

Filling the water container
1. Turn off the device by pressing the
power switch
2. Press the handheld unit release button
3. Pull the handheld unit out of the main
unit
4. Press the water container release
buttons on both sides of the handheld
unit simultaneously
5. Turn the water container upside down,
open the plug and pour in water
NOTE
Do not overfill or water may spill from
the tank. For best results, water should be
at room temperature.
6.
Close the plug and reinstall the water
container before attaching the
handheld unit to the main unit
Fitting the Mop Pad
The mop pad may have already come attached to the mop pad tray on the floor head of
the unit. If not, please follow the below steps.
1. Step on the quick release for mop pad tray and lift the unit off the tray.
2. Add a scent disc in the mesh pocket in the mop pad. Use the whole disc for a
refreshing scent or cut in half for a lighter scent.
3. Wrap the mop pad around the bottom of the tray, making sure the grey stitching is
in the front and the quick release tab is in the back.
4. Put the mop pad tray back down on the floor and set the unit back on top. It will
click into place.
OPERATION
1
2
3