background image

cathode, it is not allowed to leave the device 
motionless in a turned on condition in the excessively 
bright environment (in the morning, in the evening, in 
a daytime) for more than 30 minutes. 
 
 

Utilization of the Device in Dark Time 

 

1.

 

Open the cover of the objective lens. 

2.

 

Turn on the device – position ON of the switch (8). Green 
light should appear on the screen (passive mode).

 

3.

 

Turning the eyepiece (3) reach the sharpest image of the 
mark.

 

4.

 

Choose the object of observation and focus the objective 
of the device with the handle (10) until you see a 
distinct and sharp image of the observed object.

 

5.

 

When illumination of the observed object is required, 
turn on (8) the IR illuminator (active mode). You can 
select one of the three positions changing the 
illuminator’s power (10, 35 or 75 mW).

 

6.

 

Having finished the work, turn the ON / OFF switch (8) to 
the OFF position.

 

7.

 

Close the cover of the objective after you have finished 
the work of the device.

 

 
RECOMMENDATION. 
When the device is stored for a long time it is 
recommended not to leave batteries in the compartment 
of the device in order to avoid leakage of the 
batteries. 

 

DO NOT FORGET TO TURN OFF THE DEVICE AFTER USE! 

 

 
 
 
 
 
 
 
 
 
 
 
 

Adaptation to a Hunter’s Rifle 

 

Your night vision scope NVD-NORS210/220 can be used as a 
hunter’s night vision scope. 

 

RECOMMENDATION. 
We recommend you verify the order of usage of the 
hunter’s scope on your rifle with the local competent 
authorities.

  

 

Your night vision scope NVD-NORS210/220 can be used with 
different types of mountings, providing reliable fixation 
of the device on the particular rifles. Manufacturers of 
civil rifles do not possess uniform standards for a 
mounting place of optical devices, and as a result, a 
universal fastening device is not available. Dedal-210 is 
supplied with a fastening mount without hard fastening to 
the body, in most cases allowing the performance of special 
adaptation of the device for a particular model of rifles. 
For this purpose you should address a specialized rifle 
workshop or implement the fastening yourself, if you 
possess enough knowledge of the system.  The NVD-
NORS210/220 are shipped with a standard Weaver mount rail 
system.  If this works with your system, move to the 
Variant II Section.  
 
Adaptation rules. 
Variant I – Adapter rail with Standard Prism type. 
Fastening of the device is made with the help of the 
following parts: 

 

 
1-

 

body of the device 

2-

 

front feet with of the 
Standard prism 

3-

 

rear feet with the 
Standard prism 

4-

 

adaptor rail with 
Standard prism 

5-

 

fastening screws 

6-

 

transverse screws. 

 

 

 

Summary of Contents for NVD-NORS210











Reviews: