Koenic KST 245, Manual

Page: 21 / 86

21
English
After use
13
Put the iron back on the steam station
after use. If the steam function is not being
used for 10 minutes, the steam station will
be turned off automatically. Alternative
press to switch off the steam station.
Unplug and let the product cool down for
at least 3 hours.
Note
Empty the water tank and boiler system
completely after each use.
Transport
For transportation purpose, the iron can be
locked on the steam station.
14
To lock the iron for transportation purposes
slide it in place on the steam station until
locks in. To unlock the iron, e.g. as for
normal use slide out the iron from the
steam station while pressing and hold the
unlock button.
10
When the boiler has reached the set
temperature for steam ironing, the related
indicator will turn on steady.
11
You can turn on the steam permanent on
the iron by pressing the steam button. To
stop release the steam button.
Caution
Never directly point the steam boost into the
direction of people or animals!
Refilling the water tank
12
The water tank can be re-filled any time
during operation. If the water level is low
the “no water alarm” will alert and the
tank needs to be re-filled. Follow the steps
under chapter
Fill in water
. Press the
RESET button to turn off the “no water
alarm” indicator. Steam function can be
used again.
Overheat protection
If the water level is low the “no water alarm”
will alert and the tank needs to be re-filled. For
safety reason, the overheat protection will turn
off the steam function for few minutes. Dry
ironing function is still available. After cooling
down the indicator lights off and the steam
function can be used again.
IM_KST245_151217_V04_HR.indb 21 17/12/15 10:10 AM