Koenic KCP 850, User Manual, Page: 19 / 74

19
English
Technical data
Rated voltage: 220-240 V~, 50/60 Hz
Rated power: 85 W
Protection class: Class II
Assembly
Warning
Always ensure the appliance is disconnected
from the power supply before it is fully and
correctly assembled.
1. Place the motor
base on a flat
surface.
2. Place the juice
collector on the
motor base with
its spout fitting
with the groove.
3. Place the juice
sieve on the juice
collector.
4. Place the juicing
cone on the sieve.
Note:
Use the
small cone
3
for a
smaller fruits and
add the large cone
2
for a larger
fruits.
5. Place the lid over
the juicing cone.
6. The appliance is
now ready for use.
Preparing fruits
1. Carefully clean citrus fruits before juicing.
2. Cut the fruits into halves.
2
3
Operation
1. Unwind the power cord from the cord
storage underneath the base. Run the
power cord through the recess on the
bottom of the motor base.
2. Place the base on a level, stable, dry and
heat-resistant surface.
3. Connect the power plug to a suitable
electrical outlet.
4. Remove the lid and press the fruit halve
with one hand gently over the juicing cone.
Stabilise the appliance by holding the base
with the other hand. When the pressing
cone is pressed down, the appliance
switches on automatically and the juicing
cone starts to move and extracts the juice.
5. Place the glass/container under the spout.
Press the spout down - the juice now starts
to run into the glass/container while skin,
fruit bits and pips are collected in the juice
sieve.
6. Once you have desired amount of juice, lift
the spout to protect the juice from spilling.
7. Unplug the appliance and let it cool before
cleaning and storage.
Tips:
• Empty the juice sieve regularly to avoid
jamming.
• Ensure the juice collector does not overflow
during use.
• During use, do not press the juicing cone
too strong.
1 2
3 4
5
7
6
IM_KCP850_141106_V05.indb 19 11/6/14 2:09 PM