Koehler K463XX, Operation And Instruction Manual

Page: 11 / 19

K463XX Cloud and Pour Point Bath
Operation and Instruction Manual
K463XX-Manual
- 9 -
1.3 Instrument Specifications
Models: K46300
K46395
K46396
Electrical
Requirements:
115V 60Hz 17.7 A
220-240V 50Hz
9.7A
220-240V 60Hz
9.7A
Temperature Range: Ambient to -51°C
(-60°F)
Temperature Control
Stability:
Exceeds ASTM
Standards
Capacity:
4 position in each
chamber
Bath Medium: Denatured ethanol,
methanol or other
suitable medium
Bath Medium
Capacity: 3.79L (1.0 gal) for
each chamber
Altitude: Rated for use
below 2000m
Environmental
Conditions:
As per section
1.4.1 of IEC 61010
Laboratory Operating
Temperature:
21.11 to 22.78°C
(70 to 73°F)
'
2 Safety Information and Warnings
Safety Considerations. The use of this
equipment may involve hazardous materials and
operations. This manual does not purport to
address all of the safety problems associated
with the use of this equipment. It is the
responsibility of any user of this equipment to
investigate, research, and establish appropriate
safety and health practices and determine the
applicability of regulatory limitations prior to use.
Equipment Modifications and Replacement
Parts.
Any modification or alteration of this
equipment from that of factory specifications is
not recommended voids the manufacturer
warranty,
product safety, performance
specifications, and/or certifications whether
specified or implied, and may result in personal
injury and/or property loss. Replacement parts
must be O.E.M. exact replacement equipment.
Unit Design. This equipment is specifically
designed for use in accordance with the
applicable standard test methods listed in
section 1.2 of this manual. The use of this
equipment in accordance with any other test
procedures, or for any other purpose, is not
recommended
and may be extremely
hazardous.
This unit is NOT explosion-proof and proper
precautionary measures should be taken during
operation. Avoid
using this unit in an
environment with flammable or explosive
vapors.
Chemical Reagents Information. Chemicals
and reagents used in performing the test may
exhibit potential hazards. Any user must be
familiarized with the possible dangers before
use. We also recommend consulting the
Material Data and Safety Sheet (MSDS) on each
chemical reagent for additional information.
MSDS information can be easily located on the
internet
at http://siri.uvm.edu or
http://www.sigma-aldrich.com .