7
8) Connect Awning Clips in the front and back. (See photo on page 1)
9) Connect the Back Straps by clipping them underneath the rear bumper.
10) Adjust and tighten all the straps to a snug and even fit. This tent is designed to fit a number of different truck
models. For best results straps and rail placement will need some adjustment to fit your truck! Do not over
tighten.
Taking Down and Storing the Tent
STEP 1: Clean and Dry
1) Empty all storage pockets. Gently brush and remove any dirt or debris from the tent.
2) Allow tent to dry completely! Zip down windows and allow tent to air out and dry inside and out.
STEP 2: Collapse Tent
1) Zip the windows closed.
2) Loosen the Side Straps. Unclip the Awning Clips.
3) Undo the Velcro tabs on the Main Support Poles. Remove the Main Support Poles starting in the back and
moving forward, toward the cab. Remove the Awning Poles.
4) Remove Clamps and Mounting Rails.
5) Zip the door closed and remove the tent.
WARNING
Poles are under tension. Grasp poles firmly. Keep
face away from poles.
CAUTION
VERY IMPORTANT
—Your tent must be completely dry before storage!
Storing a wet or damp tent, even for a short time, will ruin it and void the
warranty. This causes mildew and mold that will cause a bad odor, stain, and
deteriorate the canvas and its water repellency.
If you must take the tent down while still wet or damp, loosely roll it for
transport. After transport, immediately unroll and set up or hang out to dry
thoroughly before long-term storage.
