Operating Instructions
Operating Instructions
Machine Set-Up
1. Read all instructions before operating Pro150.
2. Plug Pro150 into a grounded electrical outlet.
3. Turn Pro150 ON. Push the blue ON/OFF button in the top left corner of the control
panel. **NOTE** Pro150 will be in AUTO MODE when first turned on.
4. To switch between AUTO and MANUAL modes, press the blue MODE to the left
of the LED screen.
5. Pro150 is now ready for use.
Operating Machine In AUTO MODE
1. Machine is set to AUTO MODE when turned on each time.
2. Refer to the indicator lights labeled AUTO and MANUAL to the left of the LED
screen to check vacuum mode. The light will shine above the word AUTO when
in AUTO mode.
3. Press the green START button to engage vacuum pump. Then, press the lid down
slightly to start vacuum process. Machine is hands-free after the machine
‘catches’ the bag.
4. The Pro150 will go through the vacuum process until an internal sensor indicates
all air has been removed from bag, canister or mason jar. Machine will automatically
seal your bag as well. Machine will stop automatically.
Operating Machine in MANUAL MODE
1. Machine is set on AUTO MODE when turned on each time.
2. Press the blue MODE button to the left of the LED screen to switch between
AUTO and MANUAL modes.
3. Refer to the indicator lights labeled AUTO and MANUAL to the left of the LED
screen to check vacuum mode. The light will shine above the word MANUAL when
in MANUAL mode.
6
5
