Copyright 2013, Kodiak Networks, Inc.
5
Getting Started
The following topics will give you all the information needed to set up your Carbonado smart PTT
case for the first time.
Setting up your Carbonado Smart PTT case
Refer to the following sections to insert and charge the Carbonado Smart PTT case.
Inserting the Carbonado Smart PTT case
Complete the following steps to insert your Carbonado Smart Accessory onto your iPhone.
Charging the Carbonado Smart PTT case Battery
Your Carbonado smart case accessory comes with an inbuilt battery
which connects to your iPhone through a Dock connector
port/Charging port on your phone. The battery provided along with
your Carbonado smart accessory does not come fully charged. We
recommend that you charge the accessory at least for five hours
before you use it for the first time.
Note: With a fully charged battery, the smart PTT case can remain in standby mode for
longer duration. If the battery is completely out of charge, the charging LED appears only
after some seconds when the charger is connected.
Note: Plugging the accessory into Power outlet/USB charger will charge the iPhone &
Carbonado smart PTT case
’s battery simultaneously.
Note: When not connected to Power outlet/USB charger, user may have to press and hold
the Battery level indication button for 5 sec to charge the iPhone battery from Carbonado
smart PTT case battery.
Complete the following steps to charge the battery of the accessory.
1.
Plug the charger into a power outlet.
1.
The iPhone smart accessory is as shown in the
picture beside, insert the smart iPhone cover on to
your phone,
2.
While inserting your phone inside the cover make
sure the 30 pin dock connector port of the smart
cover is aligned along with the dock connector port
of your phone.
2.
The charger port is located at the right side of accessory. Insert the 30 pin dock connector
into the port and insert the other end of the USB cable into the charger.
