4) Match the ends of the T-poles so that they are touching. Grasp both poles firmly and push down.
WARNING
Poles are under tension. Grasp poles firmly. Keep
face away from poles. Keep hands away from the
pole joint to avoid pinching.
5) Slide the metal brace over the pole joint until the push pins in the pole lock the sleeve into place.
NOTE: To disassemble, push the pin in to slide the brace away from the joint.
6) Join upright poles (#4). Use the thumb screw to lengthen poles.
7) Unzip doors to allow air to enter.
8) Raise a tent end and insert the wide end of the upright pole onto the post on the bottom of the T-pole.
Lift the bottom of the upright pole and place it over the pin attached to the D-ring at the bottom of the
tent. Note that the wide end of the upright pole connects to the T-pole and the narrow end inserts
over the pin on the D-ring.
6
