10
Step 5
– Assembling the Awning (requires at least two people)
Study the frame diagram, figure 2. Join together an awning ridge pole (6), then insert the angled post on
the end into the hole just below the elbow on the center upright pole (1). You may need to lower the
center upright so you can reach. Place the ends of the awning gable poles (5) over the post at the top of
the awning center upright pole (8). All thumbscrews face down. Place the other end of the center awning
ridge pole (6) over the post at the top of the awning upright center pole (8). Place the center grommet at
the end of the awning over the post on the center upright pole. Tie a small loop at the end of a guyline
and secure over the top of the post. Repeat the process on both ends assembling the other two awning
ridge poles (6) to the corner awning uprights (7). Secure and stake with guylines. Secure Velcro-like tabs
under the awning to the awning frame.
Awning Enclosure #0665 (Sold Separately)
Shorten the awning ridge poles and gables to loosen and provide some slack. Attach the edge of the
enclosure to the tent wall using the velcro-like strip. Secure the top of the awning to the awning frame and
insert the eyelet over the top of the post on the top of the awning uprights. Continue around and secure
the other end to the tent with the velcro-like strip. Using the thumbscrews extend the awning ridge poles
and gable poles until the awning and enclosure are taut. Secure the bottom of the enclosure with small
stakes.
Grand Cabin with Awning Enclosure (#0665 Sold Separately)
Summary of Contents for 6160
Page 5: ...5 Tent Poles ...
Page 9: ...9 Figure 2 Frame Diagram ...
