Koden CVS-FX2, Installation Manual, Page: 23 / 78

CVS-FX2/FX2BB Chapter 1 Installation
0092602002-12
1-3
1.2 Installation of CVS-FX2 Display unit
CVS-FX2 Display unit can be installed either on desk-top or flush-mounted.
Install in the following procedure
.
1.2.1 Desk-top installation
(1) Decide the location to install the Display unit and keep the space for the maintenance
works as shown in Fig. 1.3.
(2) Mark the position where installation bracket are installed. (See Fig. 1.3)
(3) Confirm that the installation bracket matches the marked position. If not matched, correct
the marking position.
(4) Install the installation bracket in the installing location (screw hole) and fix it with 5
tapping screws (5mm) (M5 or pan-head). (Prepare 5 mm screws suitable for thickness of
installing location.)
(5) Place the Display unit on the installation bracket and fix the Display unit with washers
and knob bolts.
Display unit
M5 screw
(5 pcs)
Installation bracket
Knob bolt (2 pcs)
Fig. 1.2 Desk-top installation of Display unit
Unit: mm (inch)