Kodamo EssenceFM, User Manual

Page: 28 / 41

Mono : Toggles part to monodic play mode
Portamento Speed (0 ~ 127): Portamento Speed, works only when the part is in Mono
Mode.
Previous / Next : Jumps to the previous or next part without having to go back to the
main Performance page.
Effects and Routing
Effect levels and output routing are
configured here.
For each part, you may configure:
-
Output pair (1~4)
- Dry level (0~127), the amount of
original sound from the FM engine
-
Fx1 send level (0~127), the amount of
signal sent to the first effect DSP
-
Fx2 send level (0~127), the amount of signal sent to the second effect DSP.
Each effect DSP can be routed to any output pair, and the effect can be selected by
pressing the “Fx1” and “Fx2” buttons.
Effect selection
The list on the left selects the effect.
Each one has one or more parameters,
displayed on the right side of the
screen.
Output Volume: sets the output
volume of the effect DSP.
Knob Assign
In this page, you can assign 6 MIDI
Control Changes to the 6 Direct Access
encoders, which will be effective when
the EssenceFM is on the main
Performance page. It's a powerful way
27