Kodamo EssenceFM, User Manual

Page: 23 / 41

based on the previous element.
Assign Layer : Assigns a voice to the selected layer.
Edit Layer : Opens the selected layer in the Voice Editor. You can edit the voice and hear
it in context, but beware that any modification impacts all patches using the same voice.
Remove Layer (x) : Removes the selected layer from the patch. It doesn’t delete the
original voice.
Move Layer up : Puts selected layer before the previous element in the list.
Move Layer down : Puts selected layer after the previous element in the list.
Mute Layer : Mutes the selected layer. This setting is stored into the patch.
Mute All : Toggles mute for all layers.
Patch settings
PATCH TAB:
Name:
Sets the patch name
Category: Assign a category to current patch (cf. Sorting
section in Global Mode)
Effects : See the Effects section for more information.
Voice Seq : See dedicated section below
Icon : Sets an icon to your patch
Layer settings
The following parameters are relative to the current selected layer in the list.
TAB 1:
Volume (0 ~ 127): Sets the layer volume
Bottom Key (0 ~ 127): Sets the layer bottom bound note.
You can use MIDI Learn button on the right to set it
directly via your MIDI controller.
Top Key (0 ~ 127): Sets the layer top bound note. You can
also use MIDI Learn button on the right to set it directly via
your MIDI controller.
Bottom Velocity (0 ~ 127): Sets the lower velocity bound from which the layer should be
22