Kodamo EssenceFM, User Manual

Page: 35 / 41

Octave: Selects the base octave of the keyboard.
MIDI Out Enable: Sends the generate note events to MIDI out.
Automation
When you are using the EssenceFM with a DAW or MIDI sequencer, you want to be able
to save its patch/routing/effects settings and recall them automatically when needed. To
do so, save your performance into one of the 256 slots, then use the MIDI CC 39 and CC
40 to load the desired performance.
CC 39 Selects the performance bank : 0 (default, performances 0 to 127)
or 1 (performances 128 to 255)
CC 40 Loads the performance from the selected bank. (Performance
number = CC39*128+CC40)
To change effects on the fly, the following CCs are used :
CC 47 - 48 FX1 & FX2 type
CC 51 - 55 FX1 parameters 1 to 5
CC 56 - 60 FX2 parameters 1 to 5
CC 61 – 62 FX1 & FX2 output level
CC 90 MIDI channel DRY level
CC 91 MIDI channel FX1 send level
CC 92 Effect routing mode
0 = parallel
1 = chained
2 = c FX1 listen
CC 93 MIDI channel FX2 send level
All of these CCs except 90, 91 and 93 are global so they can be sent on any MIDI channel.
Effect List
Each effect DSP can be setup to do the effects below. Effects parameters are listed in the
34