Kodak UC102, Quick Start Manual, Page: 6 / 64

3 - If this way of fixing the clip is not possible, stick fixing
plate against vent frame and insert clip to a suitable vent.
4 - Fasten clip lever whilst pushing clip deeper so there is no
gap between fixing plate and vent.
5 - Check if vent clip is fixed firmly and correctly.
Caution: It is recommended the hot air from the vent is
not directed at the holder by adjusting the angle to
avoid overheating of the wireless charger.
1 - Unfasten clip sufficiently by rotating the clip lever.
2 - Insert clip to the center of the 3 vents (vent 2 on the
diagram) and stick fixing plate against vent 1 & 3 to avoid
shaking while driving. Refer to image 6.
VENT CLIP INSTALLATION
image 6
No Gap between
Fixing Plate and Vent
No Gap
Vent Frame Vent Frame
Vent 1 2 3
1
2
3
06